-
-
-
Performance
-
Qualifications
-
Blogs
-
Contact
Autogenous mill
- Commodity name： Autogenous mill
- Product Description
-
The autogenous mill is primarily used to process electrolyte from the assembly workshop and all other sources. After being crushed to the required particle size, the material is transferred to the finished-product silo and then conveyed by dedicated vehicles to the electrolysis workshop for use as thermal insulation material.
The electrolyte feed enters the autogenous mill via a belt conveyor. As the mill rotates, the material is crushed into smaller particles. The electrolyte that meets the required particle size passes through small openings in the mill’s liner, while coarser particles remain inside for further grinding. The discharged electrolyte is collected by a chute beneath the mill and conveyed by a downstream belt conveyor to the storage bin. After production is complete, the autogenous mill reverses to discharge any uncrushed aluminum or iron fragments retained within the mill. These impurities are screened using an iron remover to extract ferrous contaminants, and the remaining aluminum pieces are recovered for reuse.
The autogenous mill primarily consists of a cylindrical shell, a drive unit, a discharge chute, a material conveying system, a sealed dust-collection hood, and an electrical control system. Dust collection points are strategically located throughout the equipment to centrally capture dust generated during the production process.
Phone:+86-373-5596808/+86-373-5593818
Email:xxhdzd930@163.com
Fax: +86-373-5592930
Address: No. 55, Central Avenue, Xinxiang Economic Development Zone, Henan Province
HUATAO GROUP
Copyright © 2026 Xinxiang Hongda Metallurgical Vibration Equipment Co., Ltd.
Exhibitions：Click to view
WhatsApp：863735593818
Telephone：+86-373-5596808
Telephone：+86-373-5593818
Email box：xxhdzd930@163.com